BTD-CAT6-P1-HP中跨/供电器套件,带48V直流48W电源
袋装
| 1+ | ¥1951.39 |
| 1+ | ¥778.62 |
| 1+ | ¥752.6 |
| 1+ | ¥739.74 |
价格已按 8 折显示
| 品牌 | L-com(诺通) | 型号 | BTD-CAT6P1HP48W |
| 商品编码 | C6427326 | 单位 | 个 |
| 库存 | 0 | 起订量 | 1 |
✓ 正品保障✓ 全场 8 折✓ 现货速发
产品参数
| 产品名称 | BTD-CAT6-P1-HP中跨/供电器套件,带48V直流48W电源 |
| 品牌 | L-com(诺通) |
| 型号 | BTD-CAT6P1HP48W |
| 商品编码 | C6427326 |
| 所属类目 | 工控 / 电源 / POE供电器 |
| 规格/封装 | 袋装 |
| 单位 | 个 |
| 备注 | - BTD-CAT6P1HP48W The BTD-CAT6-P1-HP Single-Port Gigabit CAT6 Midspan/Injector is a commercial grade Power-over-Ethernet device that provides DC or AC power for one 10/100/1000 Base-T Power-over-Ethernet, PoE equipped Network Appliance device. The unit uses Gigabit transformers on all four data pairs in contrast to cheaper designs that only use transformers for two pairs. It is compatible with devices that support the IEEE 802.3af and 802.3at standard PoE power feed using Mode B (Pins 4/5 and 7/8). The unit can also be user configured using internal jumpers to supply power up all four data pairs simultaneously (Pins 1/2, 3/6, 4/5 and 7/8). The majority of IEEE 802.3af and 802.3at Network Appliances can pull power off all four data pairs simultaneously. This allows higher power to be fed up the cable and cuts resistive power losses in the cable by half. The unit supports both positive and negative DC as well as AC power up to 60 volts. Power-over-Ethernet eliminates the need for an AC outlet at each Network Appliance location. An integral PTC fuse cuts power in case of a short. The PTC fuse auto resets after the short is removed.<br><br> Integral High Power Surge Protection<br><br> The BTD-CAT6-P1-HP features integral surge protection for the data and power feeds for networks. The BTD-CAT6-P1-HP has been designed to meet the GR-1089 Intra-Building surge protection requirements for Ethernet lines. The design provides protection for both common and differential mode surges. The design utilizes three-pole differential Gas Tubes. The tubes feature ultra-low Line to Line and Line to Ground capacitance to minimize distortion of high-speed signals. <br><br> The BTD-CAT6-P1-HP features shielded RJ45 jacks. This along with the BTD-CAT6-P1-HP's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the injector's cast aluminum housing providing superior grounding.<br><br> This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.<br><br> This kit includes the injector/tap and a 48VDC @ 48W power supply (PS4848-25R).<br><br> This unit is also available individually or in the following kits:<br><br> Injector Only - BTD-CAT6-P1-HP<br> With 48VDC @ 70 Watt Power Supply - BTD-CAT6P1HP70W<br> With 56VDC @ 117.6 Watt Power Supply - BTD-CAT6-P1-HP56118<br><br> |